HOW TO UPDATE THE SYSTEM
1) Using a MIDI cable, connect the MIDI OUT of your MIDI
sequencer to the MIDI IN of the VM-3100/3100 Pro.
2) Power on while holding down the [SELECT] of both
channels 2 and 5. "MIDI System Update?" will be displayed.
3) Press [ENTER/YES]. "Select Update Area" will be displayed.
4) Use [F1] and [F3] to select "Boot Area" and "Main Area"
(both areas MUST be selected - please verify this before
continuing the update procedure).
5) If desired, use [F3] to select "User Area."
NOTE: If "User Area" is selected, all user data will be erased.
5) Press [F4]. "Erase Old System OK?" will be displayed.
6) Press [ENTER/YES]. When "Waiting MIDI-EX" is displayed,
begin playing the SMF update data.
7) When "Please Reboot OK" is displayed, turn the power off
and back on again. This completes the update.
NOTE: Do not turn the power off during the update. If the
power goes down accidentally, repeat the above procedure.
In such a case, the screen may become corrupted during the
update. Ignore the corrupted screen and continue the update
procedure.
VERSION CONFIRMATION
1) Power on while holding down the [SELECT] of both channels
4 and 7 until the Check Menu is displayed.
2) When in Check Menu screen, press [F4] and the system
version will be displayed.
3) Press [F4] to return to the Check Menu screen.
4) Power off to exit the Test Mode.
(c)2001 Roland Corporation U.S.